Siemens SITRANS F MASS 2100 Operating Instructions Manual page 55

– Select the "Communication" tab and configure the communication parameters. The
Figure 6-2 Set the COM Port
– Click "OK".
3. Set up the COM interface:
– Select "Modbus Networks".
– Right-click on the object name "SITRANS FC" and select "Object Properties".
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
transmitters default settings are:
- Transmission rate: 19200 baud
- Parity: even
6.3 Remote commissioning with PDM FCT010
Commissioning
55