Commissioning; Basic Safety Notes - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Commissioning

6.1

Basic safety notes

Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
• Do not commission the device until it has been mounted completely and connected in
• Before commissioning take the effect on other devices in the system into account.
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
• Check the gravity of the error.
• Correct the error.
• If the error still exists:
Toxic gases and liquids
Danger of poisoning when venting the device: if toxic process media are measured, toxic gases
and liquids can be released.
• Before venting ensure that there are no toxic gases or liquids in the device, or take the
Loss of explosion protection
Risk of explosion in hazardous areas if the device is open or not properly closed.
• Close the device as described in Installing/mounting (Page 27).
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
WARNING
accordance with the information in Installing/mounting (Page 27).
WARNING
– Take the device out of operation.
– Prevent renewed commissioning.
DANGER
appropriate safety measures.
WARNING
6
49