Software Setup - Datavideo TLM-170K Instruction Manual

The CMS software interface is shown below.
Please note that the monitor must be warmed up before calibration. Turn ON the monitor and the
color calibration device and leave them running for about 30 minutes. You can start color
calibrating your monitor after you've completed the device setup.

Software Setup

1. Select the connected "Probe"
Follow the path "Tools  Discoverable Probes" to access the color calibration devices supported
by the CMS. Select the color calibration device that is connected to the PC or the laptop. The
software setup guide will use i1Display Pro OEM for illustrative purposes.
36