Table of Contents
Advertisement
Rear Panel
SDI Input / Output
HDMI Input 1 / 2
Loop Thru Output
3.5mm Tally light
input socket
USB Port
DC IN 12V
(Phoenix)
DC IN 12V
(XLR)
Ports
3.5mm Tally Light Input
Loop Thru Output
HDMI Input 1/2
USB 2.0 Port (SERVICE)
SDI Input / Output
DC IN 12V
Power ON/OFF Switch
Headphone Jack
Once the 3.5mm headphone jack is connected, the internal
speaker will be automatically muted.
Descriptions
Tally light input. The tip, ring and sleeve of the phone jack should
be connected to tally red, tally green and the ground.
A loop thru output of SDI and HDMI inputs.
Connect HDMI video and audio source devices.
HDMI 1: YUV420 not supported
HDMI 2: YUV420 supported
For firmware upgrade only; see
information about firmware upgrade.
1 SDI input/output pair
12 V power input (XLR/Phoenix Terminal)
TLM-170K's main power ON/OFF switch
11
ON/OFF Switch
Firmware Update
for more
Advertisement
Table of Contents
