Related Manuals for Datavideo TLM-702HD
Summary of Contents for Datavideo TLM-702HD
- Page 1 TLM-702HD 2x7" TFT LCD MONITOR VOL . VOL . SOURCE ASPECT PATTERN BLUE MENU ENTER SOURCE ASPECT PATTERN BLUE MENU ENTER POWER POWER 2 X 7” HD/SD TFT LCD MONITOR TLM-702HD Instruction manual...
-
Page 2: Table Of Contents
SERVICE & SUPPORT ................................. 16 Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. -
Page 3: Fcc Compliance Statement
7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. -
Page 4: Warranty
Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year. • The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. -
Page 5: Disposal
Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 6: Introduction
The Datavideo TLM-702HD is a 19” rack mountable dual 7” TFT Monitor. The all metal construction makes the TLM-702HD robust and durable, and the 12V DC power requirements make it easy to power in the field. The high resolution TFT screens have a wide viewing angle and feature NTSC / PAL auto detection. -
Page 7: Front Panel
Front Panel Power Switch Switches the power On / Off. Stereo Headphone Mini Jack socket The level is adjusted by headphone volume control. Listen to embedded audio from HDMI or SDI sources. Headphone Volume Control Allows you to adjust the headphone volume. Source Button Select Input source between SDI, YPbPr, CVBS, and HDMI. - Page 8 MENU Calls up the on-screen adjustment menu (See Menu Options for more details). UP / DOWN Navigate the on-screen menu and set the functions & levels. ENTER Confirms the new settings or return to the default state.
-
Page 9: Rear Panel
Rear Panel HD/SD - SDI input BNC connector for SDI Input. YUV input BNC connectors for analogue (Component) video inputs. Composite Video input BNC connector for analogue (Composite) video inputs. HDMI in interface HDMI digital signal input connecter. Supports HDMI 1.1 Tally In Send in red and yellow colour tally signal to tally LED. -
Page 10: Menu Options
Menu Options Picture - Press the button once to display the Picture setting menu. MENU - Press the button to highlight the Brightness setting. ENTER - Press the button to highlight the setting that needs to be adjusted. DOWN - Press button to select the Brightness setting. -
Page 11: Advance
button to display the OSD Blending setting position. - Press the ENTER - Press the button to select the OSD blending value (from 0~7). DOWN NB: OSD Blending value 0 = Min transparency 7 = Max transparency - Press the button to save the OSD blending value. -
Page 12: Calibrating Datavideo Monitors
Tally Light Indication The TLM-702HD has a tally input connector on the rear of each panel. The Datavideo range of digital video switchers can provide tally light signals to this connector. The Datavideo range of intercom systems can also be used to pass on these tally signals. -
Page 13: Specifications
Specifications 2x HD/SD-SDI input (SMPTE 272M-C 1.5Gbps, 270Mbps with Embedded Audio) 2x Component Y.U.V Sony Betacam Specification Interface 2x CV input 2x HDMI input 2x D-Sub 15 Pin Plug (Tally Light Signal) SDI/HD-SDI Specifications Standard SMPTE 259M-C (270Mbps - 525/625 Component Video) and SMPTE 292M (1.485/1.001 Gbps) Connector BNC (IEC 169-8) HD/SD-SDI... -
Page 14: Note
NOTE... - Page 15 NOTE...
-
Page 16: Service & Support
Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests. Plus, DATAVIDEO WORLDWIDE OFFICES please visit www.datavideo.com to access our FAQ section.