Marker Color; Aspect Mat; Thickness; User Marker H1/H2 - Datavideo TLM-170K Instruction Manual

The options are listed as follows:
 OFF
 95%
 93%
 90%
 88%
 85%
 80%

Marker Color

The user is also allowed to apply different colors to the aspect marker. The five available marker
colors are Red, Green, Blue, White and Black.

Aspect MAT

This sets the transparency of the mat placed over the cutoff at the select aspect ratio. Select from
0 to 7 with 7 being an opaque mat and 0 offering the highest transparency.
MAT 7

Thickness

This sets the aspect marker thickness ranging from 1 to 15.

User Marker H1/H2

This adjusts the marker's horizontal position.
Increasing the value moves the marker to the right and decreasing the value moves the marker to
the left.

User Marker V1/V2

This adjusts the marker's vertical position.
Increasing the value moves the marker up and decreasing the value moves the marker down.

Function

This allows the user to set advanced settings for the TLM-170K, such as the scan mode, the aspect
ratio, underscan mode, H/V delay, check field, zoom, and etc. Details of how these functions can be
configured are described as follows:

Scan

This sets the Scan mode of the TLM-170K.
Zoom: Enlarge the original image according to the
Aspect: Display the image according to the
Pixel to Pixel: Display the original image resolution without scaling to match a certain resolution or
an aspect ratio. For example, when the resolution of the input video is 1920x1080 but the
MAT 6 MAT 4
aspect ratio
MAT 2
zoom ratio of the TLM-170K.
of the TLM-170K.
21
MAT 0