False Color Table - Datavideo TLM-170K Instruction Manual

For example, areas with exposure level of 56IRE when applied the false color will be shown as pink
color on the monitor. Therefore, as you increase the exposure, that area will change color to grey,
then yellow and finally to red if overexposed. Blue indicates underexposure.
An example of an original image with the false color applied is shown on the left of the image
below.
The four available false color modes are Default (Normal), Spectrum, ARRI and Red, which are
illustrated in the diagram below.

False Color Table

This enables/disables false color chart on the screen. A sample of the chart is shown below.
27