Table of Contents
Advertisement
Functions - Rear Panel
The earth terminal can be used with other equipment that has the same
feature. Connect all items together to ensure that they are grounded.
Connect the supplied switch mode power supply to this socket. The
locking collar screws into place once the plug has been inserted. It is also
possible to power the TLM-702 from other regulated 12V supplies (min
1.5A).
3.5mm Jack Socket for tally light connection. You can connect the tally
feed directly from the Datavideo RMC-140, or with the SE-500 or RMC-
90 via the TB-5 tally box. For use with any other equipment, 5v to the tip
produces a red light, 5V to the middle ring produces amber; the outer
shield is ground.
Each monitor has two composite video inputs, each with a loop-through
output. The video input can be PAL or NTSC, the TLM-702 will
automatically detect the video standard.
8
Advertisement
Table of Contents
