Rear Panel­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­6 - Datavideo TLM 170 Instruction Manual

Rear Panel
VESA 100 x 100 Mounting Holes ­ For fitting a universal VESA style wall mounting bracket.
Also used for attaching the stand (LA­100­2) to the monitor. Stand is supplied with TLM­170 & TLM­170D
models.
3.5mm Tally Light Input ­ Tally light information can be supplied to the TLM­170 from the Datavideo RMC­
140, TB­5 or TB­10 via this socket.
Component Video Input ­ BNC connectors for Component (YUV (Y/R­Y/B­Y)) Video.
S­Video Input ­ Input for S­Video (Y/C).
Composite Video Inputs 1 & 2 ­ BNC connectors for Composite Video.
Analog Audio Inputs ­ Mono Audio Inputs to correspond to the Analog Video Inputs (Component / S­Video /
Composite 1 & 2)
Speaker Output Connections ­ Speaker Output connections Max 5v p ­ p (2w)
DC In Socket ­ 2.1mm In Line Power Socket with screw lock, for connecting the power supply or suitable
12v 5A feed.
On / Off Switch ­ Main on / off switch, switches the TLM­170 on and off.
The Standby button on the front panel will switch the TLM­170 from Standby Mode to On.
VGA Input ­ Sub D 15 Pin connection for VGA Input ­ Max Res. 1920 x 1080.
HDMI Input ­ Video and Audio input from HDMI
SDI Input & Loop Through ­ BNC Input for HD / SD SDI with a Loop Through Output (D Models only)