If an FM station with sufficient signal intensity is found, the scan stops and the station is played. If an
RDS station is being received, the station name appears and, possibly, radio text.
Please use the manual station scan for setting weaker stations.
8.3 Manual station scan
>
Press the < or > buttons in quick succession to set the desired stations or frequency.
The display shows the frequency in increments of 0.05 MHz.
8.4 Scan setting
With this menu item you can set the sensitivity of the scan.
>
To do so, keep pressing the MENU button and select Scan Settings. Confirm the selection with
SELECT.
>
Select whether the scan should only stop for stations with a strong signal ([Strong Stations Only]
menu item) or for all stations including those with a weak signal ([All Stations]).
With the All Stations setting, the scan stops automatically once all available stations have been
detected. This can result in weak stations being played with background noise. When using for the
first time, and after applying the factory settings, the [All Stations] menu item is preset.
34