Table of Contents
Advertisement
4.4 Connecting Ethernet Port
Ethernet port is a standard RJ-45 port. With self-adaptation function, it can be automatically
configured to full duplex/half-duplex operation mode. It supports MDI/MDI-X self-recognition of the
cable, therefore, you can use cross-over cable or straight-through cable to connect terminal device
to network device.
The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white, 2-orange,
3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).
4.5 Connecting PoE Port
If the terminal device has a PoE port, you can directly connect the terminal device PoE port to the
switch PoE port through network cable to achieve synchronized network connection and power
supply. The maximum distance between the switch and the terminal device is about 100 m.
When connecting to a non-PoE device, the Device needs to be used with an isolated power supply.
Figure 4-5 Ethernet port pin number
Figure 4-6 Cable connection
8
Advertisement
Table of Contents
