Table of Contents
Advertisement
INSTALLATION MANUAL
Troubleshooting
Symptom
Possible Cause
No audio
1. Source not
present
playing
2. Volume turned
all the way down
3. Amplifi er/
Speaker con-
nectors reversed
4. Speakers in
room miswired or
defective
Poor
1. Clipping or
audio
distortion
quality
2. Speakers out of
phase
3.Incorrect
Impedance Match
settings
4. Incorrect
assignment of
left/right source
RCA cables or
speaker cables
Page 12
ELAN HOME SYSTEMS
Solution
Press Play, turn ON etc.
Increase volume
Check and correct con-
nections
a. Test speaker at back of
amplifi er
b.Verify connections
Reduce Receiver/Ampli-
fi er level
Carefully check polarity of
each speaker
See Imp. Match Section
starting on pg.5 and set
switches correctly
Isolate to source or room
and correct
© ELAN Home Systems 2007 • All rights reserved.
Advertisement
Table of Contents
