ELAN HOME SYSTEMS
Impedance Match Switches
Most speakers are rated at 4, 6, or 8 ohms. If connecting
speakers of different impedances to an amplifier, an average
impedance must be determined; i.e. one pair of 4 ohm speakers
is the equivalent of 2 pair of 8 ohm speakers. All 6 ohm speak-
ers should be entered into the equation as 4 ohm speakers. All
volume controls connected to an amplifier channel should have
the same Impedance Match setting.
VMOS
4X
8X
16X
2X
Never create settings that cause the amplifi er to see an imped-
ance below its minimum impedance rating as this can cause
damage to the amplifi er.
© ELAN Home Systems 2007 • All rights reserved.
INSTALLATION MANUAL
VSOS
Both Switches
MUST be in
4X
2X
1X
8X
Same Position
8X
4X
2X
1X
Page 7