ELAN HOME SYSTEMS
INSTALLATION MANUAL
Rough-In
The VSOS/VMOS will fi t into the majority of single-gang boxes.
This Volume Control should not be mounted in the same rough-
in box as primary or mains volt devices, i.e. 110v, 240v--this can
cause undesirable noise in the speakers. High-wattage light
dimmers can also cause noise issues.
ALWAYS CHECK LOCAL BUILDING AND
FIRE CODES FOR LOW-VOLTAGE
DEVICE INSTALLATION AND WIRING
REQUIREMENTS.
IN RETROFIT APPLICATIONS, ALWAYS
CHECK FOR OBSTRUCTIONS SUCH AS
PIPES, CONDUIT, OR ELECTRICAL WIR-
ING BEFORE CUTTING DRYWALL.
Page 3
© ELAN Home Systems 2007 • All rights reserved.