Cleaning The Display; Disabling The Touchscreen; Calibrating The Touchscreen; Touchscreen Protective Film - LXE VX3Plus User Manual

Lxe vx3plus: user guide

Hide thumbs Also See for VX3Plus:

Table of Contents

Display and Touchscreen

Cleaning the Display

Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or

smudged, clean only with a standard household cleaner such as Windex

Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since they

may result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not scrub optical

surfaces. If possible, clean only those areas which are soiled. Lint/particulates can be removed

with clean, filtered canned air.

The touchscreen can be disabled, if desired. For more information, please refer to "Disabling the

Touchscreen" in the "VX3Plus Reference Guide".

Although the touch screen is installed and calibrated at the factory, users may make adjustments to

it. To calibrate the touchscreen, select Start | Settings and double tap the Stylus icon.

The calibration utility displays a cross on the screen. Touch the center of the cross with the stylus

and hold for a few seconds. Release and repeat with the next cross. After all locations have been

touched, either press <Enter> or click the Calibration button.

LXE offers a replaceable touchscreen protective film to protect the touchscreen when the

VX3Plus is used in an abrasive environment. Installation and removal instructions can be found

earlier in this guide.

E-EQ-VX3PLUSOGWW-B

without vinegar or use

VX3Plus User's Guide

Table of Contents