Display And Touchscreen; Adjusting Screen Display; Cleaning The Display; Disabling The Touchscreen - LXE VX6 User Manual

60

Display and Touchscreen

The VX6 Display is a thin-film transistor display capable of supporting Half SVGA+ graphics
modes. Display size is half screen, 800 x 320 pixels. The display covering is designed to resist
stains. The touch screen allows signature capture and touch input.
The touch screen is a Resistive Panel with a scratch resistant finish that can detect touches by a
stylus, and translate them into computer commands. In effect, it simulates a computer mouse.
Only Delrin or plastic styluses should be used.
Note: Always use the point of the stylus for tapping or making strokes on the display. Never use
an actual pen, pencil or sharp object to write on the touch screen.
An extra or replacement stylus may be ordered from LXE. See the "Accessories" section for the
stylus part number.

Adjusting Screen Display

The color TFT display is an active source of light. The VX6 display brightness can be adjusted
via the brightness control keys located on the VX6 control panel. Pressing the brightness up
button increases the display brightness incrementally until maximum brightness is achieved.
Likewise, pressing the brightness down button decreases the display brightness until minimum
brightness is achieved. Because there are 64 incremental levels of brightness intensity, a single
press of either brightness adjustment button may not be noticeable. The up or down button can be
pressed and held to accelerate brightness adjustment.
Note: The 2
There are no provisions for adjusting the contrast of the display. The display remains on unless
Microsoft Windows CE .NET power management is configured to turn the display off after a
certain period of inactivity.

Cleaning the Display

Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or
smudged, clean only with a standard household cleaner such as Windex
Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since they
may result in damage to the glass surface. Use a clean, damp, lint-free cloth. Do not scrub optical
surfaces. If possible, clean only those areas which are soiled. Lint/particulates can be removed
with clean, filtered canned air.

Disabling the Touchscreen

The touchscreen can be disabled, if desired. For more information, please refer to "Disabling the
Touchscreen" in the "VX6 Reference Guide".

Disabling the Touchscreen Heater

The touchscreen heater included on extended temperature VX6 models can be disabled on certain
VX6's, if desired. For more information, please refer to "Disabling the Touchscreen" in the
"VX6 Reference Guide".
VX6 User's Guide
nd
functions <F4>, <F5>, <F6>, and <F7> keys have no function on the VX6.
Display and Touchscreen
®
without vinegar or use
E-EQ-VX6OGWW-D