Laser Barcode Scanner Warnings; Enter Data; Figure 34 Caution Labels Class Ii Scanner; Figure 35 Caution Labels Class Iiia Scanner - LXE VX3Plus User Manual

Laser Barcode Scanner Warnings

Laser Barcode Scanner Warnings
•
Do not look into the laser's lens.
•
Do not stare directly into the laser beam.
•
Do not remove the laser caution labels from the scanner.
•
Do not connect the laser barcode module to any other device.
Caution:
!
Do not pour, spray, or spill any liquid on the scanner. The Barcode Scanner contains the
circuitry, scanning motor and laser. Handle with appropriate care.

Enter Data

You can enter data into the VX3Plus through several different methods:
E-EQ-VX3PLUSOGWW-B
Please read the caution labels.
Avoid exposure. Laser light is emitted from the scanner's aperture.
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The scanner uses laser light. The following labels are representations of caution
and warning labels placed on laser scanners.
IEC 825-1
1993
LASER LIGHT - DO NOT
1ST ED.
STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0 mW - 675nm
CAUTION
DO NOT STARE INTO BEAM
630-680nm LASER
1.0 MILLIWATT MAX OUTPUT
CLASS II LASER PRODUCT
COMPLIES WITH 21 CFR 1040.10 1040.11 AND IEC825
Figure 34 Caution Labels
Class II Scanner
•
The tethered scanner connected to the COM1 serial port provides barcode data entry
•
The serial port and SUB port are used to input/output data
•
The keyboard provides manual entry
•
The touchscreen also provides manual entry
IEC 825-1
LASER RADIATION
1993
DO NOT STARE INTO BEAM OR
1ST ED.
VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS
CLASS 3A LASER PRODUCT
2.5 mW - 675nm
CAUTION
LASER RADIATION. DO NOT STARE
OPTICAL INSTRUMENTS.
675nm LASER
2.5 MILLIWATT MAX OUTPUT
CLASS IIIA LASER PRODUCT
COMPLIES WITH 21 CFR 1040.10 1040.11 AND IEC825
Figure 35 Caution Labels
Class IIIA Scanner
VX3Plus User's Guide
47