Bluetooth Devices - LXE VX3Plus User Manual

Bluetooth Devices

Bluetooth Devices
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices
The Bluetooth taskbar Icon state and Bluetooth scanner LED states change as Bluetooth devices
are discovered, pair, connect and disconnect. There may be audible or visual signals as paired
devices re-connect with the VX3Plus. Only LXE printers or scanners are recognized and
displayed in the Bluetooth panel.
Reference Guide for details).
Taskbar
Icon
Note:
Notes
• The VX3Plus does not have a Bluetooth managed LED.
• The LED on the Bluetooth scanner illuminates during a scanning operation; there is no
Scan LED on the VX3Plus.
• Barcode data captured by the Bluetooth scanner is manipulated by the settings in the
VX3Plus Scanner Properties control panel applet.
• Multiple beeps may be heard during a barcode scan using the Bluetooth scanner; beeps
from the Bluetooth scanner as the barcode data is accepted/rejected, and other beeps from
the VX3Plus during final barcode data manipulation.
See Accessories for supported Bluetooth printers and scanners.
AppLock, if installed, does not stop the end-user from using Bluetooth, nor does it stop authorized
Bluetooth devices from pairing with the VX3Plus while AppLock is in control.
E-EQ-VX3PLUSOGWW-B
for each VX3Plus. The System Administrator has also enabled / disabled
Bluetooth settings and assigned a Computer Friendly Name for each VX3Plus.
See the VX3Plus Reference Guide for information and instruction on the VX3Plus,
Bluetooth control panel applet and supported LXE Bluetooth printers and
scanners.
Legend
Bluetooth module is connected to one or more of the targeted Bluetooth
device(s).
VX3Plus is not connected to any Bluetooth device.
VX3Plus is ready to connect with any Bluetooth device.
VX3Plus is out of range of all paired Bluetooth device(s). Connection is
inactive.
When an active paired device, not the VX3Plus, enters Suspend Mode, is turned Off or
leaves the VX3Plus Bluetooth scan range, the Bluetooth connection between the linked
device and the VX3Plus is lost. There may be audible or visual signals as paired devices
disconnect from the VX3Plus.
All other Bluetooth devices are ignored. (see VX3Plus
51
VX3Plus User's Guide