Express Scan; Figure 3-42 Express Scan Desktop Icon; Figure 3-43 Express Scan Password Input - LXE MX3Plus Reference Manual

148

eXpress Scan

eXpress Scan may be used for the initial network configuration of the mobile device. Available
configuration parameters can include wireless network settings and the Avalanche Mobile Device
Server Address.
Barcodes are created with the eXpress Config utility. Please refer to Using Wavelink Avalanche on
LXE Windows Computers, available on the LXE manuals CD, for information on eXpress Config.
Depending on the barcode length and the number of parameters selected, eXpress Config
generates one or more barcodes for device configuration.
To use eXpress Scan to configure an LXE device:
1. Start eXpress Scan on the LXE device by double tapping the eXpress Scan icon on the
desktop.
2. Enter the barcode password used when the barcode was created, if any.
3. Barcode 1 must be scanned first. The scanned data is displayed in the "Data" text box.
The password, if any, entered above is compared to the password entered when the
barcodes were created.
MX3Plus Reference Guide

Figure 3-42 eXpress Scan Desktop Icon

Figure 3-43 eXpress Scan Password Input

Tap Start.
eXpress Scan
E-EQ-MX3PLUSRG-B