Getting Help
ActiveSync with a Cradle
To ActiveSync, the cradle must be powered off, the ActiveSync cradle cable attached to the
desktop PC and the cradle, then the cradle powered up.
Note:
Tethered Scanner and a Cradle
To use a tethered scanner connected to the RS-232 port on the cradle, the cradle must be powered
off, the ActiveSync cable removed and the cradle powered up. Then, the scanner can be attached
to the cradle's serial port.
Getting Help
All LXE user guides are now available on one CD and they can also be viewed/downloaded from
the LXE ServicePass website. Contact your LXE representative to obtain the LXE Manuals CD.
You can also check the LXE ServicePass website for the latest manual releases.
You can get help from LXE by calling the telephone numbers listed on the LXE Manuals CD, in
the file titled "Contacting LXE". This information is also available on the LXE ServicePass
website.
Explanations of terms and acronyms used in this guide are located in the file titled "LXE
Technical Glossary" on the LXE Manuals CD.
Manuals
MX3Plus User's Guide
LXEbook – MX3Plus User's Guide (download to MX3Plus)
MX3 Cradle Reference Guide
MX3 Multi-Charger Plus User's Guide
CE API Programming Guide
RFTerm Reference Guide
Integrated Scanner Reference Guide
E-EQ-MX3PLUSRG-B
ActiveSync transfers files to the MX3Plus over the RS-232 connector on the cradle using
the MX3X070CBLD9RS232AS cable.
MX3Plus Reference Guide
47