Summit Wireless Security; Figure 5-11 Default Profile - LXE MX3Plus Reference Manual

196

Summit Wireless Security

Use the instructions in this section to complete the entries on the Profile tab according to the type
of wireless security used by the network. The instructions that follow are the minimum required
to successfully connect to a network. Your system may require more parameters than are listed in
these instructions. Please see your system administrator for complete information about your
network and its wireless security requirements.
To begin the configuration process:
Be sure to click the Commit button after all changes have been made.
MX3Plus Reference Guide
•
On the Main tab, click the Admin Login button and enter the password.
•
LXE recommends editing the default profile with the parameters for your network.
Select the Default profile from the pull down menu.

Figure 5-11 Default Profile

•
Make any desired parameter changes as described in the applicable following section
determined by network security type and click the Commit button to save the
changes.
Summit Radio
E-EQ-MX3PLUSRG-B