LXE MX3 Programming Manual page 270

254
To set maximum message length, first scan this barcode:
Maximum Message Length
Next, scan numeric barcodes that correspond to the desired maximum message value using the
"Keypad Alphanumeric Symbols" at the end of this chapter.
If you wish to change your message length number selection, before scanning the Save barcode, scan
the Discard barcode on the "Keypad Alphanumeric Symbols" page. Scan the Save barcode when you
have finished setting the correct maximum message numeric value.
Integrated Scanner Programming Guide
5380SF 2D Imager
E-SW-SCANNERPG-L