LXE MX3 Programming Manual page 69

Symbol Barcodes - Scanner Parameters – General
E-SW-SCANNERPG-L
Code Option
Type Value Option
I 2 of 5
0 No check digit processing.
1 Reader has validated check digit.
3 Reader has validated and stripped check digit .
Example: An I 2 of 5 barcode without check digit, 4123, is
Codabar
0 No check digit processing.
1 Reader has checked check digit.
3 Reader has stripped check digit before transmission.
Example: A Codabar barcode without check digit, 4123, is
Code 93
0 No options specified at this time. Always transmit 0.
Example: A Code 93 barcode 012345678905 is transmitted
MSI Plessey
0 Single check digit checked.
1 Two check digits checked.
2 Single check digit verified and stripped before transmission.
3 Two check digits verified and stripped before transmission.
Example: An MSI Plessey barcode 4123, with a single
D 2 of 5
0 No options specified at this time. Always transmit 0.
Example: A D 2 of 5 barcode 4123, is transmitted as
UPC/EAN
0 Standard packet in full EAN country code format, which is 13
digits for UPC-A and UPC-E (not including supplemental
data).
1 Two digit supplement data only
2 Five digit supplement data only
4 EAN-8 data packet.
Example: A UPC-A barcode 012345678905 is transmitted
Bookland EAN
0 No options specified at this time. Always transmit 0.
Example: A Bookland EAN barcode 123456789X is
PDF417, MicroPDF417 (SE2223 only)
0 Reader set to conform to protocol defined in 1994 PDF417
symbology specifications. Note: When this option is
transmitted, the receiver cannot reliably determine whether
ECIs have been invoked or whether data byte 92
doubled in transmission.
1 Reader set to follow the ECI protocol (Extended Channel
Interpretation). All data characters 92
transmitted as ]I04123
transmitted as ]F04123
as ]G0012345678905
check digit checked, is transmitted as ]M04123
]S04123
as ]E00012345678905
transmitted as ]X0123456789X
Integrated Scanner Programming Guide
has been
DEC
are doubled.
DEC
53