LXE MX3 Programming Manual page 70

54
According to AIM standards, a UPC with supplemental barcode is transmitted in the following format:
In the SE 1223 and SE2223, however, the format is changed to:
Therefore, a UPC with two supplemental characters, 01234567890510, is transmitted to the host as a 21-
character string, ]E00012345678905]E110.
Integrated Scanner Programming Guide
Code Option
Type Value Option
2 Reader set for Basic Channel operation (no escape character
transmission protocol). Data characters 92
Note: When decoders are set to this mode, unbuffered Macro
symbols and symbols requiring the decoder to convey ECI
escape sequences cannot be transmitted.
3 The barcode contains a UCC/EAN-128 symbol, and the first
codeword is 903-907, 912, 914, 915.
4 The barcode contains a UCC/EAN-128 symbol, and the first
codeword is in the range 908-909.
5 The barcode contains a UCC/EAN-128 symbol, and the first
codeword is in the range 910-911.
Example: A PDF417 barcode ABCD, with no transmissin
]EO (UPC chars) (terminator) ]E2 (supplemental) (terminator)
]EO (UPC chars) ]E2 (supplemental)
protocol enabled, is transmitted as ]L2ABCD.
Symbol Barcodes
are not doubled.
DEC
E-SW-SCANNERPG-L