Advertisement
Removing the main tray assembly
Prior to performing the following procedure, remove
the top cover and the front panel assembly.
1.
Turn over the body and insert a screwdriver into the
slot of the bottom chassis, then move it in the
direction of the arrow in Fig.4. The main tray
assembly will move forward.
2.
Draw the main tray assembly toward the front
manually.
3.
Bring up the joint a over the boss of the loading base
assembly, and remove the main tray assembly
toward the front.
4.
Disconnect the card wire, on the back of the main
tray assembly, from connector CN841 on the relay
board 1.
Joint a
Loading base
assembly
Fig.7
(See Fig.4 to 6)
Card wire
Boss
Relay board 1
Main tray assembly
Bottom chassis
(slot)
Main tray assembly
Relay board 1
Loading base assembly
XV-F80BK/XV-F85GD
Fig.4
Bottom chassis
Fig.5
CN841
Joint a
Main tray assembly
Fig.6
1-7
Advertisement
