Advertisement
Sub tray position and operation check
Prior to performing the following procedures, remove
the fitting and the main tray cover.
CAUTION:
Make sure the sub trays are set as shown
in Fig.5. When moving the sub trays, put
the sub trays which come to the position (4)
and (5) forward in turn.
Prior to moving the sub trays by hand, the
sub tray drive motor assembly must be
removed in advance referring to the
preceding page.
Do not put the sub trays forward except at
the position (4) and (5).
Removing the U/D cam (U) (See Fig.7)
Prior to performing the following procedure, remove
the main tray cover.
1.
Remove the two screws E attaching the U/D cam
(U) on the upper side of the main tray assembly.
(See Fig.5 and 6)
U/D cam (U)
(2)
Sub tray (1)
(3)
(4)
Fig.5
Fig.6
XV-F80BK/XV-F85GD
(7)
(6)
(5)
E
1-19
Advertisement
