Advertisement
Removing the loading motor / loading
motor board (See Fig.24 and 25)
1.
Remove the two screws U
motor on the upper side of the loading base
assembly.
2.
Turn over the loading base assembly and unsolder
the two soldering g on the loading motor board.
3.
Remove the two screws V
motor board.
4.
Spread apart the two tabs h and pull out the loading
motor.
CAUTION:
When reattaching the loading motor board,
settle the wires on the two hooks i on the
loading base assembly and draw the other
end to the left as shown in Fig.26.
Removing the tray switch board
1.
Turn over the loading base assembly, and remove
the tray switch board while spreading apart the two
tabs j.
Hooks i
Tray switch board
Tabs j
Fig.26
attaching the loading
attaching the loading
(See Fig.26)
Loading motor board
Loading motor
Fig.24
Loading motor board
Soldering g
Tabs h
Fig.25
XV-F80BK/XV-F85GD
U
V
Loading motor
1-13
Advertisement
