Advertisement
4.
Reattach the sub tray (3) while inserting the shaft l
into the groove m of the main tray, and at the same
time, putting the shaft n on the U/D cam (L). Then,
move the sub tray (3) toward the sub tray (2) until it
stops.
REFERENCE:
At this point, the sub tray (3) is on top of
the sub tray (2).
5
Reattach the sub tray (4) while fitting the part o to
the ACT.gear (2) on the main tray.
CAUTION:
Make sure the part o of the sub tray (4)
engages with the ACT. gear (2) correctly
in the center of the main tray.
REFERENCE:
At this point, the sub tray (4) is on top of
the sub tray (3).
6.
Reattach the sub tray (6) and (5) in the same way.
CAUTION:
Make sure that the trays are attached to
the correct position and that they can be
moved. To move the sub trays manually,
the sub tray drive motor assembly must
be removed in advance.
Sub tray (6)
Sub tray (5)
Fig.13
Sub tray (4)
Shaft l
Part o
Groove m
Fig.11
Fig.12
Sub tray (5)
Fig.14
XV-F80BK/XV-F85GD
Sub Tray (3)
Shaft n
Sub tray (2)
Sub tray (3)
1-21
Advertisement
