Advertisement
XV-F80BK/XV-F85GD
Removing the sub trays (See Fig.8 to 14)
Prior to performing the following procedure, remove
the main tray cover and the U/D cam (U).
CAUTION:
Remove the sub tray assembly (4), (3), (2),
(5), (6), (7) and (1) in order. When
reattaching,
procedure without fail.
1.
Remove the sub tray (4) and (3) from the main tray
upward.
2.
Remove the sub tray (2) upward.
3.
Similarly, remove the sub tray (5) , (6) and (7)
upward.
4.
At last, remove the sub tray (1) upward.
Reattaching the sub tray
1.
Reattach the sub tray (1) while fitting the part f to the
groove of the ACT. gear (1) marked g.
2.
Reattach the sub tray (2) while inserting the shaft h
into the groove i of the main tray, and at the same
time, fitting the part j to the groove of the ACT. gear
(1) marked k .
Move the sub tray (2) toward the tray (1).
3.
Similarly, reattach the sub tray (7).
1-20
observe
the
following
(3)
Sub tray (4)
Sub tray (2)
Sub tray (2)
Shaft h
Part j
Marked k
Groove i
(5)
Fig.8
(1)
Fig.9
Sub tray (1)
Sub tray (7)
Part f
Marked g
Fig.10
(6)
(7)
Advertisement
