Timers/Delays; Modify Tcp/Ip Settings - Daikin iLINQ Quick Start Manual

Timers/Delays

Select Parameters → Timers/Delays from the Main Menu. Modify factory timer/delay settings
per site requirements. See the Daikin iLINQ User Manual supplied with the unit for a detailed
description of each setting.

Modify TCP/IP Settings

If the controller is to be connected to a TCP/IP network, the TCP/IP settings must be provided
by the network administrator. Navigate to the Settings → Communication screen in the
Navigation Menu to view and modify the TCP/IP settings. Set the DHCP toggle switch to
Enabled if the network will automatically assign IP addresses to connected devices. If a static IP
address is used, enter the appropriate IP Address, Subnet Mask, Default Gateway and DNS
Address settings. The updated TCP/IP settings do not become effective until the controller
application is restarted. Restart the controller by clicking the Confirm Update & Reboot toggle
switch.
DAIKIN ILINQ QUICK START GUIDE 20