Titan Pulsite Link Instruction Manual page 18

4.3.3.2.3 Dual Flow Alarm:
For details for each PIN see the Alarm logic table or hover mouse over the set point to see the
action of the output with the chosen settings.
© Titan Enterprises Ltd
Checking this will enable a range of flow to be
entered. When the flow is outside/inside of this
range the alarm will be triggered.
The remaining settings in the input box are the
same as for Single Flow alarms.
• The alarm will automatically activate and
reset in proportion to the user set
Hysteresis of the Threshold levels.
• The INVERT checkbox will reverse the
action of the alarm output. (See the Alarm
Logic Table).
www.flowmeters.co.uk PulsiteLink_Instruction_Manual_0722
18