Test Outputs; Software Information - Titan Pulsite Link Instruction Manual

Hide thumbs Also See for Pulsite Link:

Table of Contents

4.1.2 Retrieve Settings from Meter

When connected the settings will normally be automatically retrieved from the meter. If this is

not the case, or the user wishes to check the meter saved settings against those shown in the

software, they can be retrieved from the nonvolatile memory of the flow meter by pressing the

looking glass icon.

4.1.3 Test Outputs

This tab enables the user to manually set

outputs on the Pins for testing to the

target device.

Once the required output is selected click

the "Start Test" button and all pins will

give the selected output rate for 23

seconds.

This displays the current software version

of the Interface software and the flow meter

connected.

www.flowmeters.co.uk

PulsiteLink_Instruction_Manual_0722

Table of Contents