Interface Setup - Titan Pulsite Link Instruction Manual

Hide thumbs Also See for Pulsite Link:

Table of Contents

4 Interface Setup

4.1 Connecting Meter to PC

Before use, download and install the Titan Interface Software from memory stick or the

www.Flowmeters.co.uk

The Pulsite Link should be set up using the USB interface and a suitable windows-based

computer.

Below is a screen shot of the opening Software screen:

NOTE: When correctly connected the bars will rotate in the bottom left had corner and you should see

On connecting Pulsite Link the Software will normally automatically load the settings

currently saved in the memory of the connected meter. The user can use the spy

glass icon to automatically pull the meter saved settings at any time.

From this software the user is able to configure all options of the meter. Detailed descriptions

follow, but if the user hovers the mouse over a menu item, a brief description will be displayed

to help.

website

"All Controls enabled"

www.flowmeters.co.uk

PulsiteLink_Instruction_Manual_0722

Table of Contents