Albatron KM333 Series User Manual page 40

When this option is enabled, the "suspend mode" time is configurable from 1 minute to 1
hour. The HDD Power Down, which ranges from 1 min. to 15 min. and includes a "disable"
option.
Note: If you select Min. or Max. Power Saving modes, the "HDD Power Down" value and
the "Suspend Mode" value are both fixed.
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period
of system inactivity. All other devices remain active.
Options: Disabled (default)、1 Min、2 Min、3 Min、4 Min、5 Min、6 Min、7 Min、8 Min、9 Min、
10 Min、11 Min、12 Min、13 Min、14 Min、15Min
Suspend Mode
This item allows you to select the period of inactivity before the system is suspended or
put into suspend mode. Options: Disabled(default)、1Min、2Min、4Min、6Min、8Min、10Min、
20Min、30Min、40Min、1Hour
Video Off Option
This field determines when to activate the video off feature for monitor power
management.
Options: Suspend→Off (default), Always On.
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank (default)
Blank Screen
DPMS Support
Modem Use IRQ
This determines the modem's IRQ. Options: 3 (default)、4、5、7、9、10、11、NA.
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung." Options: Delay 4 Sec, Instant-Off (default).
Run VGABIOS if S3 Resume
Select whether you want to run VGABIOS when the system wakes up from the S3 resume
function. Options: Auto (default)、Yes、No
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to
the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
36
KM333 Series