Integrated Peripherals - Albatron KM333 Series User Manual

KM333 Series

Integrated Peripherals

Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI slot or an AGP slot. Options: AGP、PCI Slot (default)
VIA OnChip IDE Device
If you highlight the "OnChip IDE Device" label and then press the enter key, it will take you
to a submenu with the following options:
IDE Channel 0/1
The mainboard chipset contains a PCI IDE interface with support for two IDE channels.
Select "Enabled" to activate the first and/or second IDE interface. Select "Disabled" to
deactivate an interface if you are going to install a primary and/or secondary add-in IDE
interface. Options: Enabled (default)、Disabled
IDE Prefetch Mode
The "onboard" IDE drive interfaces supports IDE prefetching for faster drive access. If you
install a primary and/or secondary add-in IDE interface, set this option to "Disabled" if the
interface does not support prefetching. Options: Enabled (default)、Disabled
Primary/Secondary/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the
IDE devices that the onboard IDE interface supports. Modes 0 to 4 will increase
performance incrementally. In Auto mode, the system automatically determines the
best mode for each device. Options: Auto (default)、Mode0、Mode1、Mode2、Mode3、
Mode4.
31