Albatron KM333 Series User Manual page 13

FAN Headers
Three power headers are available for the cooling fans. Cooling fans play an important
role in maintaining the ambient temperature in your system.
Attention: This system has a BIOS configuration feature that
issues a warning (during POST) when the CPU fan is not plugged
in or is not functioning. In order to make use of this feature. You
must make sure that the CPU power cable is attached specifically
to the "CPUFAN" header. The BIOS configuration option is
described in the "Hardware Monitor" section of the BIOS Setup
Utility Chapter.
Memory Installation
These mainboards contain 2 memory slots which use 184-pin DDR SDRAM with a total
memory capacity of 2 GB. You must install unbuffered/ non-ECC DDR-SDRAM DIMMs with
either 128 MB, 256 MB, 512 MB or 1 GB of memory. These modules must be DDR333 or
DDR266 SDRAM.
9
KM333 Series