Albatron KM333 Series User Manual page 30

KM333 Series
CPU Internal Cache
Make CPU internal cache active or inactive. System performance may degrade if you
disable this item. Options: Enabled (default)、Disable.
External Cache
This option allows you to enable or disable "Level 2" secondary cache on the CPU to
enhance performance. Options: Enabled (default)、Disabled
CPU L2 Cache ECC Checking
Make CPU L2 cache ECC function active or inactive. Options: Disabled、Enabled (default)
Quick Power On Self Test
Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign physical drive B to logical
drive A and vice-versa. Options: Disabled (default)、Enabled.
Boot Up NumLock Status
Selects the power on state for NumLock.
Options:
On (default) Numpad keys are number keys.
Off Numpad keys are arrow keys.
Typematic Rate Setting
When "Enabled", the "typematic rate" and "typematic delay" can be configured.
Typematic Rate determines the keystroke repeat rate used by the keyboard controller.
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000
APIC Mode
By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)
26