Albatron KM333 Series User Manual page 31

KM333 Series
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT
environment. Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64 MB of
RAM. Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives. Options: Disabled (default)、
Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)、Enabled
Advanced Chipset Features
DRAM Clock/ Drive Control
Press <Enter> to enter next page for DRAM Clock/ Drive Control settings.
DRAM Timing
This item determines DRAM clock/ timing using the manual configuration.
Options: Manual、Auto(default)
DRAM CAS Latency
This item determines CAS Latency. When synchronous DRAM is installed, the number of
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from
default value specified by the system designer. Options:1.5、2、2.5、3
Precharge to Active (Trp)
You can set the time to precharge. Options: 5T、4T、3T、2T
Active to Precharge (Tras)
This item allows you to select DRAM Active to Precharge Delay. Options: 9T、8T、6T、5T
Active to CMD (Trcd)
Select the DRAM delay time when being read. Options:5T、4T、3T、2T
27