Albatron KM333 Series User Manual page 32

KM333 Series
DRAM Command Rate
This item determines DRAM Command Rate.
Options: 2T Command (default)、1T Command
AGP & P2P Bridge Control
Press <Enter> to enter next page for AGP & P2P Bridge Control.
AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a portion
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
Options: 256M、128M (default)、64M、32M、16M、8M、4M
AGP Mode
This item allows you to select the AGP Mode. Options: 1X、2X、4X
AGP Driving Control
By choosing "Auto" the system BIOS will automatically set the AGP output buffer drive
strength. By choosing "Manual", it allows user to set the AGP output buffer driver
strength.
AGP Driving Value
While the AGP Driving Control option is set to "Manual", it allows the user to set AGP
Driving Value. Options: DA (default)、00~FF
AGP Fast Write
The AGP Fast Write technology allows the CPU to write directly to the graphics card
bypassing the system AGP 4X speed. Choose "Enable" only when you used with AGP card
support.
Options: Disabled (default)、Enabled
AGP Master 1 WS Write
When enabled, writes to the AGP (Accelerated Graphics Port) are executed with one wait
state. Options: Disabled (default)、Enabled
AGP Master 1 WS Read
When enabled, reads from AGP (Accelerated Graphics Port) are executed with one wait
state. Options: Disabled (default)、Enabled
VGA Share Memory Size
Select the size of the onboard VGA port. Options: Disabled、16M、32M、64M (default)
28