Configuration" Menu Item - Siemens SIMATIC Ident CB Gate Operating Instructions Manual

8.2.5

"Configuration" menu item

The "Configuration" menu item is divided into the following areas, depending on the system
variant used:
• Antenna power
• Settings
• Parameters
Figure 8-6
The "Settings" area is only displayed in the system variant with four antennas and two read
points ("Tire").
Antenna power
You can define the radiated power of the individual antenna in the "Antenna power" area.
Table 8- 8
Parameter
Antenna
Power
Set power
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
"Configuration" menu item
Description of the "Antenna power" parameters
Description
Selection of the antenna for which you want to change the radiated
power.
Drop-down lists for selecting the required radiated power that the
antenna should output.
Button to store the set radiated power in the reader and enable this.
Note: Note that changes cannot be saved retentively in this menu. After
the system is restarted, these parameters need to be set again and
transferred. Alternatively, you can define the radiated power via the
WBM. The settings in the WBM are saved retentively.
Operation via the CB Gate user interface
8.2 Menu items
51