Logging" Menu Item - Siemens SIMATIC Ident CB Gate Operating Instructions Manual

8.2.2

"Logging" menu item

Information on the 50 last read operations is displayed in the "Logging" menu item.
Figure 8-3
Table 8- 5
Information
Times stamp
EPC ID
Orientation
Ten read operations are displayed per page. You can switch between the individual pages
with the "<" and ">" buttons. You can delete the logbook or all entries in it with the "Reset
logging" button.
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
"Logging" menu item
Information displayed about the detected transponders
Description
Time stamp when the transponder was identified the first time.
The time stamp is shown in the following format:
| Y| Y| Y| Y| -| M| M| -| D| D| | H| H| :| M| M| :| S| S| .|MS|MS|MS|
ID of the identified transponder
Note: If the read operation was not successful, a corresponding error message
is output instead of the EPC ID.
Orientation/position detection of the object
Note: If the orientation was not detected, "Unclear" is output.
Operation via the CB Gate user interface
8.2 Menu items
47