Siemens SIMATIC Ident CB Gate Operating Instructions Manual page 14

Safety instructions
2.4 General safety instructions
NOTICE
Modifying the control software may impact functionality
Please note that modifying the control software may impact the functionality of the SIMATIC
Ident CB Gate.
Notes about usage
NOTICE
HMI device approved for indoor use only
The HMI device may be damaged if it is operated outside of closed indoor spaces.
Operate the HMI device indoors only.
Note
Operate the device only in a normal atmospheric environment
The technical characteristics of the device described in the operating instructions are
guaranteed if you operate the device in normal ambient air conditions with usual air
composition.
Note
Operate the device only in a dry environment
The device is intended for operation in a SELV/PELV circuit according to IEC/EN 61131 or
IEC/EN 61010-2-201 in a dry environment, which means a dry environment on the rear of the
device.
14
Operating Instructions, 08/2022, C79000-G8976-C671-01
SIMATIC Ident CB Gate