Adjusting Rear Deflector; Maintaining The Draper Roller; Removing And Reinstalling The Drive Roller - MacDon DWA Operation And Parts Manual

Double windrow attachment for m1-series self-propelled windrowers

Hide thumbs Also See for DWA:

Table of Contents

4.1.6 Adjusting Rear Deﬂector

The rear deﬂector (A) prevents crop from entering inside

draper. To adjust the rear deﬂector, follow these steps:

1. Loosen all eight nuts (B) along the length of the deck.

2. Set the deﬂector height (C) to be 1.5–8 mm

(1/16–5/16 in.) above the draper.

3. Tighten nuts (B).

The draper rollers have non-greaseable bearings. The external seal should be checked every 200 hours or more

frequently in sandy conditions to obtain the maximum bearing life. Remove front skid to inspect seals.

DANGER

To avoid bodily injury or death from unexpected start-up or fall of raised machine, stop engine, remove

key and engage safety pin before going under machine for any reason.

214048

MAINTENANCE AND SERVICING

Figure 4.8: Draper Deck Cross Section

Revision A

Table of Contents