Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines; Class 1 Laser Product Warning - Juniper EX2200 Hardware Manual

EX2200 and EX2200-C Switches Hardware Guide

Laser and LED Safety Guidelines and Warnings

General Laser Safety Guidelines

Class 1 Laser Product Warning

188
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 188
Class 1 Laser Product Warning on page 188
Class 1 LED Product Warning on page 189
Laser Beam Warning on page 189
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Attention Produit laser de classe I.
Warnung Laserprodukt der Klasse 1.
Avvertenza Prodotto laser di Classe 1.
Advarsel Laserprodukt av klasse 1.
Aviso Produto laser de classe 1.
¡Atención! Producto láser Clase I.
Copyright © 2018, Juniper Networks, Inc.