Purpose - Atmel ATSAMB11 BluSDK SMART User Manual

1

Purpose

This getting started guide describes the setup of ATSAMB11 Xplained board and bringing up an AT CMD
example supplied as part of BluSDK Smart release.
The AT command set is listed in the following table.
Table 1-1. AT Command Set
Command
Reset
Configuration
Start Scan
Stop Scan
Command Description
Reset the link layer
Set device configuration
Start scan operation
Stop an ongoing scan operation
ATSAMB11 BluSDK SMART – AT CMD – Getting Started Guide
Atmel-42693A-ATSAMB11-BluSDK-SMART-AT-CMD-Getting-Started-Guide_UserGuide_032016
Command Syntax
AT+RESET
AT+CFG_DEF
AT+SCAN
AT+STOP
[
USER GUIDE
]
3
3