Atmel ATSAMB11 BluSDK SMART User Manual page 7

Figure 4-3. Building the AT CMD Application
5. Download the application via the USB to the ATSAMB11 board by using the Device Programing
option available in Tools as shown below.
Figure 4-4. Flashing the Application on Atmel MCU
6. Inside the device programming the user has to select the correct configuration for the device and
finally program the device by using the program button.
Figure 4-5. Flash Programming
7. Once the application is flashed, now AT CMD Application is ready for usage.
ATSAMB11 BluSDK SMART – AT CMD – Getting Started Guide
Atmel-42693A-ATSAMB11-BluSDK-SMART-AT-CMD-Getting-Started-Guide_UserGuide_032016
[ ]
USER GUIDE 7
7