Summary of Contents for Atmel ATSAMB11 BluSDK SMART
Page 1
ATSAMB11 BluSDK SMART Find Me Profile - Getting Started Guide USER GUIDE Introduction The Find Me Profile (FMP) defines the behavior when a button is pressed on one device to cause an alerting signal on a peer device. Features ...
(Find Me Locator) BLE Link Hardware Setup Connect the ATSAMB11 board to the host PC using a Micro-USB cable. Figure 3-1. EDBG USB Port ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [ USER GUIDE ] Atmel-42612A-ATSAMB11-BluSDK-SMART-Find-Me-Profile-Getting-Started-Guide_UserGuide_112015...
When the Find Me Locator device wishes to cause an alert on the Find Me Target device, it shall write the specific Alert Level in the Alert Level characteristic. ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [USER GUIDE Atmel-42612A-ATSAMB11-BluSDK-SMART-Find-Me-Profile-Getting-Started-Guide_UserGuide_112015...
Figure 5-1. Creating a New Example Project Select “SAMB11” in device family, enter “Find Me” in search window, and expand Atmel Corp Projects. The location and the name of the project can be selected in the respective fields. Click Figure 5-2.
Page 6
Figure 5-5. Flash the Find Me Application Once the application is flashed, the Phone Alert Status Client Application is ready for usage. ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [USER GUIDE Atmel-42612A-ATSAMB11-BluSDK-SMART-Find-Me-Profile-Getting-Started-Guide_UserGuide_112015...
(for example TeraTerm) shall be opened and attached to the corresponding COM port enumerated on the PC by the device. The baud rate should be set to 115200. ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [ USER GUIDE ]...
® On the iPhone , enable Bluetooth in the Settings page. Start the Atmel SmartConnect App and scan for devices. ATMEL-FMP will be appear amongst the devices scanned. Click on ATMEL-FMP to connect to the ATSAMB11 device. Figure 7-2. ATMEL-FMP in Device Discovery Atmel SMART App Once connected, the client side will request for the pairing procedure with the iPhone.
Page 9
Since the service level connection is now established, the user will see the notifications based on the alert level settings as depicted in the following diagrams. ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [ USER GUIDE ]...
Page 10
Sending Alerts to Find Me Target ATMEL-FMP Note: A BLE compatible Android phone with the Atmel SmartConnect App can also be used to run the demo as described above. The Android version of the SmartConnect app provides the same look and feel as the iOS mobile app described above.
User indemnifies Atmel from any claim arising from user's handling or use of this evaluation board/kit. Except for the limited purpose of internal development and evaluation as specified above, no license, express or implied, by estoppel or otherwise, to any Atmel intellectual property right is granted hereunder.
Revision History Doc Rev. Date Comments 42612A 11/2015 Initial document release. ATSAMB11 BluSDK SMART – Find Me Profile – Getting Started Guide [ USER GUIDE ] Atmel-42612A-ATSAMB11-BluSDK-SMART-Find-Me-Profile-Getting-Started-Guide_UserGuide_112015...
Page 14
DISCLAIMER: The information in this document is provided in connection with Atmel product s. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND COND ITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRO DUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON -INFRINGEMENT.