Running The Demo - Atmel ATSAMB11 BluSDK SMART User Manual

5

Running the Demo

Type one of four commands you want on the console.
1. Reset command
Type "AT+RESET" and then press 'Enter' key.
Figure 5-1.
UART Initialized
Device name
Device Address : 0xF8F005F35D67, Type : 0
>>BLE Stack Initialized, use "AT+" for AT-Commands
#
-------------------------------------------------------
01
02
03
04
-------------------------------------------------------
AT+RESET
Searching for CMD handler...
Processing...Reset Handler
DONE
2. CFG_DEF command
Type "AT+CFG_DEF" and then press 'Enter' key.
Figure 5-2.
AT+CFG_DEF
Searching for CMD handler...
Processing... Config Handler
DONE
ATSAMB11 BluSDK SMART – AT CMD – Getting Started Guide [USER GUIDE]
8
8
Atmel-42693A-ATSAMB11-BluSDK-SMART-AT-CMD-Getting-Started-Guide_UserGuide_032016
RESET command
: Atmel BLE Device
CMD
RESET
SCAN
STOP
CFG_DEF
CFG_DEF command
Handler Ptr.
100108b9
10010917
10010941
100108cf