Panasonic WH-ADF0309J3E5CM Service Manual page 96

Part Name Figure
Operating
Instructions
Installation
Instructions
Short-circuit
connection

Use M10 for suspension bolts.

Field supply for suspension bolts and nuts.
12.1.1.3 Type of Copper Tube and Insulation Material
If you wish to purchase these materials separately from a local source, you will need:
1. Deoxidized annealed copper tube for refrigerant tubing.
2. Foamed polyethylene insulation for copper tubes as required to precise length of tubing. Wall thickness of the
insulation should be not less than 8 mm.
3. Use insulated copper wire for field wiring. Wire size varies with the total length of wiring. See the section "12.1.4.
ELECTRICAL WIRING" for details.
CAUTION
Check local electrical codes and regulations before obtaining wire. Also, check any specified instructions or
limitations.
12.1.1.4 Additional Materials Required for Installation
1. Refrigeration (armored) tape
2. Insulated staples or clamps for connecting wire (See your local codes.)
3. Putty
4. Refrigeration tubing lubricant
5. Clamps or saddles to secure refrigerant tubing
6. Scale for weighing
Q'ty Remarks
1
1
For vertical
installation
1 (Located on the back
of the electrical
component box lid.)
96