Panasonic WH-ADF0309J3E5CM Service Manual page 131

5. Select the "Unit no." by pressing the
button and press the
The "Exit detailed settings and restart?"
(Detailed setting-end) screen appears on the LCD
display.
Select "YES" and press the
the setting is completed, perform the test run for
the external static pressure setting described in
"Auto External Static Pressure Setting Operation".
ALL
Auto External Static Pressure Setting Operation
6. Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
7. Press the or
If you wish to see the next screen instantly, press
the or button. Select "4. Test run" on
the LCD display and press the
The "Test run" screen appears on the LCD display.
Test run
Change
button.
button. When
20:30 (THU)
NO
, and
20:30 (THU)
button to see each menu.
button.
20:30 (THU)
20:30 (THU)
Test run
OFF
[ ] Confirm
Change the display from "OFF" to "ON" by
or
pressing the
the
The "Maintenance func" screen appears on the
LCD display.
buttons
8. Press the
on the LCD display.
9. Press the
Test run setting mode screen appears on the LCD
display.
10. Set the operation mode to "
fan speed mode to "
pressing the
131
or button. Then press
button.
Test run 20:30 (THU)
Test run
ON
Change [ ] Confirm
20:30 (THU)
button. "TEST" will be displayed
20:30 (THU)
TEST
button. Test run will be started.
20:30 (THU)
TEST
MODE
FAN SPEED
(FAN SPEED)" by
or button or
button. Then press the
20:30 (THU)
TEST
FAN SPEED
MODE
FAN
FLAP
(MODE FAN)" and
or
button.
FLAP